Tube Processing
Thanks to the extensive knowledge and experience of our employees and our state-of-the-art equipment, we can fulfil virtually all of our customers' pipe processing requirements. We manufacture a wide variety of tube and fixed lengths from high-quality raw material. From tubes to ready-to-install components or complex assemblies - by using a wide range of processing techniques, such as welding, bending, brushing, polishing or surface finishing by powder coating, each of our products stands for the highest quality and functionality.
More than just a tube thanks to Wuppermann's processing
With Wuppermann you can get everything from one source, which is a clear advantage. We support you right from the design phase of complex components and create cost reduction potential for you. Your contact person in our company accompanies your product from development to production. Due to our own tool construction, we are able to react quickly and flexibly to product requirements.
Our customers have individual wishes, which we fulfill with our tube processing . In order to advise and support our customers in this respect, we have one contact person who accompanies our customers from product development to production.
What services are provided in tube processing?
Our tube processing at Wuppermann includes:
- Tube bending parts
- Digital 3D measurement
- Processing with the tube laser
- Welding components
- Fixed lengths / saws
Bending and forming, just as the customer demands, that is our aspiration. Our production possibilities here range from 5-axis to left/right bending to 3-roll forming for arched constructions. We accompany you from 0-series up to large series. We solve the most difficult tasks in the forming of tubes through our longstanding experience.
Complex 3D-bent tubes and components are accompanied by our digital 3D measurement. A maximum of measurement methodology is required to ensure consistent product quality and accuracy of the fitting. Our cutting-edge 3D measuring system enables us to use the reference point system (RPS) as well as the best fit method.
There are almost no limits to the processing by tube laser: We open up special design possibilities for custom-made tubes. Whether cutting or engraving - we offer individual and precisely fitting production down to the last detail.
The welding of assemblies is carried out on finely tuned welding jigs. It can be welded by robot or, in the case of very demanding products, by hand. We achieve best results with a high repeating accuracy.
Please contact us to find out which individual solution you need in terms of tube processing. We can also offer you a solution for special requirements: Whether welded assemblies for vehicle construction, school furniture, store fitting, heating systems or fall protection on roofs or tube bending parts and forming for arched construction
Tube lengths | from 3.000 to 14.000 mm |
Fix lengths | from 20 to 3.000 mm |
Laser cutting | to 180 mm diameters |
Further processing (roll grooves, sawing, punching) | |
CNC tube bending | to diameters of 50 mm |
Robot welding | WIG/TIG and MIG/MAG systems |
Stainless steel | grinding, brushing, wet polishing |
Pickled steel | annealing (outsourced) |
Surface finishing | e.g., powder coating |
Assembly, including subassemblies |
Technical product advice
Contact
Our Wuppermann team will help you to find solutions unerringly.
Find the right contact person